DIEPOLAST®
Properties
- Large load ranges
- For pressure and thrust loads up to 30 t/m2
- Good vibration damping/-isolation
- Good decoupling effect
- Usable for isolation of source and/or recipient
- Temperature range -30 °C up +70 °C (short term up to +120 °C)
- Low compression set
- Good resistance to mineral oils, greases and various solvents
- Good resistance to hydrolysis
FOR INSULATION OF VIBRATION AND NOISE REDUCTION
Diepolast® is a high-tech, mixed-cellular elastomer consisting of a special polyether- urethane. The material is used for vibration decoupling in mechanical engineering as well as in construction industry. Our Diepolast® has excellent properties both under compression and thrust loads.
13 base types of Diepolast® SD in combination with defined dimension and height allows to fine-tund solutions for almost every application. For special applications and extremely high loads, the 7 types of the closed-cellular series Diepolast® dyn S and heavy load solutions made of Diepolast® dyn HL can be selected. The special cell structure of the "dyn" types allows even underwater installations, as the cell structure almost eliminates the soaking effect of liquids.
In addition to the flat sheet material, it is also possible to produce technical moulded parts made of Diepolast®.
If necessary, special types can be produced with precisely matching Sstrength. The special properties of the material will be adjusted. Colour changes are possible. Such special designs require a minimum production quantity, differing by type.
In contrast to non-cellular elastomers, Diepolast® has gas volumes enclosed in the fine-cell structure. Accordingly, the material is compressible both in static and dynamic stress. It is therefore also suitable for shallow construction sites in situ concrete way.
Diepolast® dyn
Diepolast® dyn is a closed-cell high-tech elastomer and consists of a special polyether-urethane. Due to its strucutre, this material absorbs almost no fluids and can thus also be used in oppressive groundwater.
The 5 basic types Diepolast® dyn S75 – Diepolast® dyn S1500 are available, enabling solutions for almost every application. The desired requirements can be fulfilled by the choice of the respective type, the supporting surface and the height.
Due to its excellent dynamic properties, Diepolast® dyn is also suitable for difficult applications. Our product range offers special types for heavy load foundation bearer and dynamic loads up to 9 N/mm2 (load peaks even up to 18 N/mm2). These types are called Diepolast® dyn HL and are available upon request.